Tender for Supply install commissioning and testing factory m...

Purchaser's Detail

Tender's Details

BOQ Item Description: Supply install commissioning and testing factory made Design verified as per IS IEC61439 1 and 2 by CPRI approved manufactures along with FAT floor mounted powder coated comprising LT panel box KIOSK out door typesize platform mounted suitable for 415 volt 3 phases 4 wire 50 Hz AC supply system all as specified and directed having busbar chamber with 4 Nos insulated AL bus bars 600 amps rating installed on percelain insulators the panel shall be dust and vermin proof double door made of 3 point 15 mm CRCA MS sheet outer and inner and individual compartment for MCCB oblique volt oblique Amps meter and 50 into 50 into 6 mm thick angle iron for base frame work having angle iron 4 Nos each Suitable long welded to frame oblique cubical and grouted in ground upto 0 point 5 Meter by using PCC 1 2 4 B2 of Suitable size the ground over the ground level upto 1 Mtr height 2 Nos earth terminal to be welded with feeder piller the complete feeder pillar box should be anti corrosive coating and finally epoxy polyester powder coating of flint grey shade RAL 7032 including internal wiring with PVC insulated solid copper conductor FRLS cables appropriate size but not less than 2 point 5 Sqmm Front with suitable lugs for incoming oblique outgoing feeders and comprising of all as specified as under
Incomer First MCCB FP 250 A 36 kA with fixed one no Second 4 Nos aluminium bus bars of 400 Amp current rating capacity of suitable size of length as actually required at site for 3 phase and neutral mounted on epoxy oblique FRP bus bar insulator complete with nut bolt fixing arrangement complete one set
Outgoing
MCCB FP 100A 16KA with fixed thermal release 3 Nos
Material compartment first Digital type Amp meter 0 to 250 Amp size 96mm into 96mm with selector switch and 3 Nos CT of ratio 250A oblique 5A 01 No second Digital type volt meter 0 to 500 v with selector switch one Nos
Third RVB LED incating lamp 3 Nos

BOQ Title: Provn of 4 pole structure, Isolation Transformer
Item Title: Supply install commissioning and testing factory made Design verified as per IS IEC61439 1
Item Quantity: 1
Unit of Measure: Each
Delivery Period (In number of days): 15
Start Date: 09-12-2024 10:24 AM
End Date: 18-01-2025 9:00 AM
BOQ Title: Provn of 4 pole structure
GeMARPTS Searched: Crawler Hydraulic Excavator (V2), Intra Oral or Dental Examination (PMT) Sets