Tender for Modification And Conversion Of 2 Number Of Dumper ...

Purchaser's Detail

Tender's Details

Modification And Conversion Of 2 Number Of Dumper Placer To Tipper Along With Hydraulic Jack
1. Sub chassis The body made up of consist of the iron C channel haiva made up of iron of 5 m length and 0.15m height and 0.05m the size of the sub chassis is 4mtr length consisting of 02 C channel of 5 m length, Qty: 2.00, Amt: 170000.00
2. Body chassis The chassis is made up of M.S Iron C Channel of length 4 m 0.20mx0.075m both the upper and lower C channel with existing in the sub chassis and Haiva body chassis are connected with the chassis main chassisi with the MS adapter of C channel of 0.35m length x 0.02 x 0.4 mm fitted with nuts and bolts and welded for good jointing the size of body chassis is 4m x 1m the body is connected with MS plate of 13 mm thick on two sides with the M.S bushes & pin of bush size of 75 mm etc.,, Qty: 2.00, Amt: 192000.00
3. Haiva body The body is made up of MS sheet of 3mm both side the bottom sheet is also made up of MS Sheet of 4mm thick & 2.10m width the side of the sheds are supported with 0.8m height 05 Nos of C channels of 100x51x6mm of both side of body which are fixed vertically by and should be welded properly the body is so supported with the horizontal C Channel of 100x51x6mm of 3.90m length top and bottom, Qty: 2.00, Amt: 350000.00
4. Slantpart back The body should be supported or connected with a back of the slant height of 2.00 m height 2.10 m width with made up of M.S sheet of 4 mm thick the corners of the back are made up of MS C channel of 128x51x6mm of 2.00 m height either side 2 Nos the back / slant height of the back body is supported / connected with the 2 nos of MS C Channel of 1.80 m height with the channel size 100x51x6mm the inner side of the back is fixed with the MS C Channel 02 Nos of 2.10m width etc.,, Qty: 2.00, Amt: 168000.00
5. Back door The back door should consist of made up of MS Sheet of 2.10 length and 1.80m height welded & supported with M.S C channel 04 No of 1.80 height with channel size 75x40x6mm vertically and C Channels top and bottom supported of 2.10 m length welded to support the door of channel size 75x40x6mm horizontally the back door are fixed with locking arrangements necessary, Qty: 2.00, Amt: 152000.00
Category: SERVICES
EMD: 44200.00
Est Amt: 1872880.00
Tender Fees: 500.00