Tender for Helical Inline Gear Motor to the Model s [Helical ...

Purchaser's Detail

Tender's Details

Helical Inline Gear motor to the model S [Helical Inline Gear motor to the model SK 973.1 - 112MP/4 TF of make M/s Nodes & Loads or to the following specifications: - 1. Input Speed - 1440 1/min 2. Ratio - 94.96 3. Output Speed - 15 1/min 4. Service Factor - 1.3 5. Output torque - 2519 Nm 6. Overhung load - 24.4 kN 7. Axial Load - 22 kN 8. Power - 4 kW 9. Voltage - 400/690 V 10. Frequency - 50 Hz 11. Efficiency Class - IE3 12. Motor Duty S1 - Continuous 13. Enclosure - IP55 14. Insulation Class - F 15. Mounting Pos - M1 16. Type of housing - Foot Mount 17. Output Shaft - Solid Keyed Shaft 18. Output Shaft - Dia 60X120 mm 19. Gearbox Breather Options Auto vent 20. Motor Cooling TEFC - Totally Enclosed Fan Cooled Note:- Material of Construction: i. Fabricated Steel Housing (Stress relieved) ii. All gears shall be manufactured from steel forgings or rolled bar made from steel 17CR NI MO6/18CR NI MO6 (case hardening steel). iii. All gears shall be case hardened to 58-62 HRC and profile ground. iv. Output shaft shall be of EN 9 material Normalized to 201 BHN (min) v. Bearing used shall be rolling element type of make SKF/NTN/Timken/FAG only. Special conditions: a) The firm should call RWF for stage inspection once at raw material stage and another at final assembly stage, M.T.C, for raw material shall be furnished at first stage inspection, at the time of final assembly inspection, certificates of heat treatment for gears and housings shall be furnished and smooth rotation of assembled gear box shall be ensured. b) Warranty: The material shall have a warranty of 12 months from the date of supply. MAKE- SELF]
Helical Inline Gear motor to the model SK 973.1 - 112MP/4 TF of make M/s Nodes & Loads or to th e following specifications: - 1. Input Speed - 1440 1/min 2. Ratio - 94.96 3. Output Speed - 15 1/min 4. Service Fa ctor - 1.3 5. Output torque - 2519 Nm 6. Overhung load - 24.4 kN 7. Axial Load - 22 kN 8. Power - 4 kW 9. Voltag e - 400/690 V 10. Frequency - 50 Hz 11. ...
Contract Type : Goods
Tender Type : Limited - Indigenous
Contract Category : Expenditure
Evaluation Criteria : Itemwise/Consigneewise
Bidding System : Single Packet
Pre-Bid Conference Required : No
Pre-Bid Conference Date Time : Not Applicable
Tendering Section : P 2
Inspection Agency : CONSIGNEE
Publishing Date / Time : 08/08/2024 15:37
Procure From Approved Sources : No
Approving Agency : Not Applicable
Closing Date Time : 14/08/2024 10:45
Validity of Offer ( Days) : 60
Ranking Order for Bids : Lowest to Highest
Advertised Value :
Tender Doc. Cost (INR) : 0.00
Earnest Money (INR) : 0.00

Consignee
SSE AXLE FORGE MAINT.,
RWF
Karnataka 1.00 Numbers