Tender for 25W Vhf Digital Radio

Purchaser's Detail

Tender's Details

25W VHF Digital Radio with suitable Power supply unit, Antenna and RF cable as per RDSO /S PN/TC/107/2018 Ver. 2 or later along with programming kit 1 no. with software Make:Kenwood, Motorola or better, (1) frequency range 146 to 174 MHZ, spot frequency 161.150MHZ, 162.100MHZ & 160.400MHZ, (2) Technical Parameters as per clause No. 5 D of aforesaid RDSO specification, (3) cable length to be supplied 40 mtr RG 217 Low loss cable, (4) SMPS (Float & Boost charging mode) shall be of 12V/15A output and suit able for charging 12V/120AH battery, (5)Firm must submit compliance sheet as per 5.17.8.1 of RDSO specif ication as well as documents related to as per digital protocol shall be ETSI DMR Open standard, and OEM s hould be Category-1 (Manufacturer Status) member of DMR association & with built-in AES 256 encryption. (6) Special features required as per the guideline of Railway Board -Priority channel scan and automatic swi tch over to priority channel within 5 sec after call is over and also Switch over to analog and digital channel without any delay.(7) Radio model should be PoC passed by RDSO and MTCTE certificate should be submitt ed at the time of supply.(8) warranty Period 60 month from the date of supply. [ Warranty Period: 60 Mo nths after the date of delivery ] ]
Contract Category: Expenditure
Contract Type : Goods
Tender Type : Open - Indigenous
Contract Category : Expenditure
Evaluation Criteria : Itemwise/Consigneewise
Bidding System : Single Packet
Pre-Bid Conference Required : No
Pre-Bid Conference Date Time : Not Applicable
Tendering Section : 92
Inspection Agency : TPI Agency
Publishing Date / Time : 08/09/2025 16:53 Item Category General
Procure From Approved Sources : No
Approving Agency : Not Applicable
Closing Date Time : 18/09/2025 11:30
Validity of Offer ( Days) : 90
Ranking Order for Bids : Lowest to Highest
Advertised Value :
Tender Doc. Cost (INR) : 0.00
Earnest Money (INR) : 0.00

Consignee TCI (HF) CLA, CR Maharashtra 20.00 Set
Inspection Details Stage Inspection Not Required